I decided to build my rudder pedals next. These are the pieces to build the brake pedal. Only the rear cockpit will have brakes on my plane.

Here the brake pedal is in the jig while tack welding it.

Here the brake pedals are welded and most of the pieces for the rudder pedals have been cut. One thing the plans don't state is that there are right and left pedals (notice the rudder cable attach points). The plans only show one side.

Here the rudder pedals have been welded. I still need to add the rudder cable tabs and add the tabs to the brake pedals to attach them to the rudder pedals and the arms that connect to the brake master cylinders.

These are the rudder cable attach fittings (4 of them, 2 for front and 2 for rear pedals).	Preparing to weld the tabs onto the rudder pedals.
The final product, ready to be sand- blasted and painted.